Alltek Cherlina

To Print this page!

Alltek Cherlina is a ready mixed premium exterior grade material made with natural quartz chips, marble, sand, other carefully selected and sieved minerals in an acrylic binding medium.

Alltek Cherlina material when spread over the surface with a trowel gives a beautiful grained finish.

Alltek Cherlina has excellent weather resistance, surface adhesion and water resistance.

Technical Data
Dilution Potable Water
Sp. Gravity 1.8
pH 7.5 to 8.5
Toxicity Non toxic
Shelf life 6 months in unopened container.
Surface drying Vary depending upon the climate, however for touch Dry - one hour @30 degree centigrade. For good Surface drying leave 72 hours.
Material Coverage Around 4 sft/kg depending upon the substrate.
Note : Use alltek cement primer (ext) for priming the surface before applying alltek Cherlina.

  • Readymixed paste for direct application.
  • Water resistent.
  • Easy application with a trowel.
  • Long durability.
Colour White
Packing 25/5/1 kg bags.
Surface Preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Mixing Add potable water if required for dilution.
  • Apply the material on dry wall with a trowel over the surface.
  • Remove excess material & level the surface.
  • Run the flat trowel over the surface to make a pattern.