Alltek Coarse

To Print this page!

Alltek coarse is a ready mixed interior grade material meant for working on rough cement plastered, undulated surfaces or where deep lines are made in the plaster surface. alltek coarse material being coarse in nature gives better filling over the surface and levels the underlying surface.

Alltek coarse material is specially formulated using pulp, coarse sand and other fillers giving good surface filling and leveling. For better surface finish alltek fine and superfine should be applied over alltek coarse material.

Alltek coarse is applied with alltek spatulas or gurmala and can also be sprayed on to the surface for leveling.


Technical Data
Sp. Gravity 1.7
pH 7.5 to 8.5
Toxicity non toxic
Shelf life 6 months in unopened packing.
Fire rating class “o” rating
Surface drying touch dry 4 hrs at 30 degree centigrade. leave 24 hrs between coats.
Flexibility accommodates normal thermal movement Without flaking or chipping.
Coverage 100 sft/25 kilo bag in single coat. Coverage may vary depending upon the substrate.

Features
Features
  • Readymixed paste for direct application.
  • Easy application.
  • Long durability.
  • Covers undulations & levels the surface.
  • Inherent flexibility and is less prone to cracking.
  • Very econominal.
Colour Beize
Packing 25kg HDPE sack.
Surface Preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface
  • Fill the surface cavities if any and level the surface
Material Mixing Add potable water if required for dilution
Application
  • Apply directly on cement plastered walls in one / two coats as required.
  • Use steel edged Alltek spatulas for application.
  • Excess material drawn from the wall while leveling can be reused.
  • Apply first coat, allow surface to dry cover the undulations.
  • Apply alltek fine / super fine for further finishing.