Alltek Fine

To Print this page!

Alltek fine is an interior grade ready mix plaster meant for working on slightly rough / undulated surfaces. alltek fine gives the wall a leveled finish to work on further with alltek superfine application. Where the plastered surface is more rough and undulated or surface lines are made in the cement plaster, alltek coarse should be applied and leveled before application of alltek fine. alltek fine is specially formulated using specially selected uniform, round, sand particles and other mineral fillers imparting excellent filling on the surface. The acrylic binding medium used gives good surface adhesion and the alkaline nature of the product has good compatibility with the underlying cement surface.
alltek fine is supplied in a ready mixed paste form for direct application on cement plastered walls / over alltek coarse surface. alltek fine can also be sprayed on to the walls.

Technical Data
Sp. Gravity 1.7
pH 7.5 to 8.5
Toxicity non toxic
Shelf life 6 months in unopened packing.
Fire rating class “o” rating
Surface drying touch dry in 4 hrs at 30 degree centigrade and 24 hrs between coats.
Coverage 150 sft/25 kilo bag in single coat. Coverage may vary depending on the substrate.

  • Readymixed paste for direct application.
  • Easy application.
  • Long durability.
  • Covers undulations & levels the surface.
  • Inherent flexibility and is less prone to cracking.
  • Very econominal.
Colour Beize
Packing 25kg HDPE sack.
Surface Preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Mixing Add potable water if required for dilution.
  • Apply directly on cement plastered walls or over alltek coarse surface.
  • Use steel edged Alltek spatulas for application.
  • Excess material drawn from the wall while leveling can be reused.
  • Apply first coat, allow surface to dry well.
  • Apply alltek super fine for further finishing.