Alltek Gold Line

To Print this page!

Alltek goldline is an exterior grade ready mixed plaster made with natural minerals - marble powder, sand and other carefully selected and sieved minerals in an acrylic binding medium. It also contains film protecting additives, for long years of protection over the applied surface.

Alltek goldline being exterior grade material has excellent surface adhesion and water resistance protecting the building, the surfaces from sunlight and rain.

Alltek goldline materials are supplied in various natural / synthetic shades, in paste form for direct application over the surface with a roller. Various designs can be achieved by rollers.

Technical Data
Shade Natural / synthetic shades as per our shade card.
Material Premixed paste from factory
Dilution Potable Water.
Sp. Gravity 1.7
pH 7.5 to 8.5
Toxicity non toxic
Shelf life 6 months in unopened container.
Surface drying vary depending upon the climate. normal drying 24 hrs, for good drying leave 72 hrs.
Coverage 100 sft/25 kg, however material coverage vary greatly depending upon roughness & undulations of the surface.
Note : Use alltek cement primer (ext) / alltek basecoat for priming the surface before applying alltek goldline.

  • Readymixed paste for direct application.
  • Water resistent.
  • Easy application with a roller.
  • Long durability.
  • Texture finish as per the roller used.
Colour White / natural colours.
Packing 25kg HDPE sack.
Surface Preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Mixing Add potable water if required for dilution.
  • Apply alltek goldline in single coat.
  • Apply alltek goldline with alltek spatula over the primed surface & level the material.
  • Run the roller over the surface to make the desired texture.