Alltek Roof Coat

To Print this page!

Alltek roof coat is specially formulated waterproofing material in a simple ready mixed paste form for direct application over roof tops, exterior walls, water tanks etc.

allek roof coat being single component in paste form has convenience & simple application procedure and does not require waterproofing specialist to handle the job.

Alltek roof coat has good surface adhesion and flexibility to withstand normal thermal movement.


Technical Data
Ph: 7.5 to 8.5
Toxicity Non – toxic
Shelf life 6 months in unopened container
Storage Clean dry place without explosure to sunlight.
Note: alltek roof coat is not meant for traffic areas. Ensure the surface to be coated with roof coat is perfectly dry at the time of application. For best results apply roof coat well before the onset of monsoon or long after monsoon. Ensure that there is no moisture trapped in the walls or roof slabs at the time of application.

Features
Features
  • Acrylic based.
  • Very simple application.
  • Excellent surface adhesion.
  • Good coverage & economical.
Colour White
Packing 25/5/1 kg bag.
Coverage Approx. 20 sft/kg.
Surface preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Dilution Apply the material as supplied. When required add little water for dilution.
Application
  • Clean the surface.
  • Apply the material on dry surface with paint brush / roller in 2 - 3 mm thickness.
  • Allow good surface drying for 72 hours.