NCL Skim Coat

To Print this page!
White Cement based Wall putty

NCL skim coat -1127
is white cement based very smooth white finishing puttty for direct application over masonry walls/ ceilings.

Description :
NCL skim coat - 1127 is white cement based, polymer modified dry mix putty, specially made to work on levelled, cement sponge finished interior and exterior surfaces.

NCL skim coat - 1127
can easily be mixed manually or by machine at site. Only specified quantity of potable water needs to be added at site and follow simple mixing procedure to get a uniform paste.

NCL skim coat - 1127 has excellent blade run and workability.

Composition : NCL skin coat - 1127 is factory premixed dry powder mix consisting of white cement, finely selected and sieved sand, polymer and other fine aggregates to facilitate surface adhesion, workability and surface smoothness.

Technical Data
Dry density 898gr/lit
pH 10 to 12
Dilution Potable Water
Pot life 2 hrs. after mixing water
Storage Store in a clean & dry area Avoid water / moisture contact
Shelf life 6 months from the date of manufacture in sealed, unopened sacks
Coverage 20-24 sft / kg in single coat application. Coverage varies depending upon substrate condition & application practice.

  • Just add potable water
  • Assured factory quality
  • long durability
  • Can be used for interior & exterior surfaces
  • Easy mixing & application
  • gives very smooth surface
  • very economical
Product Code 1127
Colour White
Packing 40kg/20kgHDPE SACK with liner
Surface preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Clean the surface with water to remove dust.
  • Fill the surface cavities if any and level the surface.
Material Mixing
  • Add potable water.
  • Mix to get uniform paste.
  • Add 8 ltrs / 20kg sack.
  • Leave the mixer for 10 min. & remix again adding additional water to get uniform paste.
  • Mix the quantity that can be consumed in 2 hrs. time.
  • Remix again for further requirement.
  • Always pour material into water.
  • Use stirrer for mixing preferably.
  • Apply directly on cement plastered walls.
  • Apply in two coats.
  • Use steel edged long spatulas for application.
  • Excess material drawn from the wall while leveling can be reused.
  • Draw the blade with material from bottom to the top ensuring no material wastage.
  • Allow surface to dry for 6 to 8 hrs. between coats.
  • Fill the surface pores if any and allow to dry.
  • Use 320 or more fine emery paper for sanding.
  • To get Maximum advantage of the product give 3 light water curings twice a day for 3 days.