Alltek Superfine (Ext)

To Print this page!

Alltek Superfine (Ext) is an exterior grade superfine ready mixed plaster for application over leveled, smooth, sponge finished, cement plastered exterior surfaces.

alltek superfine (ext) is made in a ready mixed paste form with selected and graded inert fillers in an acrylic binding medium offering excellent surface adhesion. It has good surface resistance gives smooth finish mainly for open verandas, balconies, kitchens, Bathrooms etc.

Alltek superfine (Ext) is supplied in off white colour and can be over-coated with any exterior grade cement primer and paint.

Alltek superfine (Ext) can be applied by hand with alltek spatula / trowel and can also be sprayed on to the wall to obtain textured finish.


Technical Data
Sp. Gravity 1.7
pH 7.5 to 8.5
Toxicity non toxic
Shelf life 6 months in unopened container.
Surface drying touch dry around 4 hrs at 30 degree centigrade & leave 24 hrs drying between coats.
Water resistance material being exterior grade has potable water resistance.
Coverage 200 sft/25 kg sac in single coat application. Coverage varies depending on the substrate.

Features
Features
  • Readymixed paste for direct application.
  • Easy application.
  • Long durability.
  • Inherent flexibility and is less prone to cracking.
  • Very econominal.
Colour Off-White
Packing 25kg HDPE sack.
Surface Preparation
  • Remove loose sand particles /nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Mixing Add potable water if required for dilution.
Application
  • Apply directly on cement plastered leveled walls.
  • Use steel edged Alltek spatulas for application.
  • Excess material drawn from the wall while leveling can be reused.
  • Apply first coat, allow surface to dry well.
  • Cover the undulations if any.
  • Apply final coat.