Alltek Trendy

To Print this page!

Alltek trendy is an exterior grade ready mixed plaster made with natural minerals - marble powder, sand and other carefully selected and sieved minerals in an acrylic binding medium. It also contains film protecting additives, for long years of protection over the applied surface.

Alltek trendy being exterior grade material has excellent surface adhesion and water resistance protecting the building, the surfaces from sunlight and rain.

Alltek trendy materials are supplied in various natural shades, when spread over the surface in two coats with a spatula, gives a relatively smooth granular texture to the building surface.

Technical Data
Shade natural shades as per our shade card.
Material Premixed paste from factory
Dilution Clean water.
Sp. Gravity 1.69
Ph 7.5 to 8.5
Toxicity non toxic
Shelf life 6 months in unopened container.
Surface drying vary depending upon the climate. normal drying 24 hrs, for good drying leave 72 hrs.
Coverage 100 sft/25 kg, however material coverage vary greatly depending upon roughness & undulations of the surface.

  • Readymixed paste for direct application.
  • Exterior water resistent.
  • Easy application.
  • Long durability.
  • Inherent flexibility and is less prone to cracking.
  • Offer smooth / textured finish.
  • Very econominal.
Colour White / natural colours.
Packing 25kg HDPE sack.
Surface Preparation
  • Remove loose sand particles / nibs / fins / oil & grease from the surface.
  • Fill the surface cavities if any and level the surface.
Material Mixing Add clean water if required for dilution.
  • Apply directly on cement plastered walls.
  • Use steel edged Alltek spatulas for application.
  • Excess material drawn from the wall while leveling can be reused.
  • Apply first coat, allow surface to dry well.
  • Cover undulations if any.
  • Apply final coat.